Epoxy Garage Floors in
Millington, TN

Garage floor coatings in Millington are priced by the square foot. Epoxy flake systems typically start around $5 per square foot installed, and faster-curing polyaspartic systems start around $7 per square foot, with the final price depending on the condition of your concrete and the prep required. A typical two-car garage is roughly 400-500 square feet. Every floor receives a free, detailed written estimate after an on-site measure, so you will know your exact price before any work begins.

Most residential garage floors are completed in one to two days. Epoxy systems generally need 24-72 hours to cure before you can park on them, while polyaspartic topcoats can be ready for foot traffic the same day and vehicles in as little as 24 hours.

DIY kits rely on acid etching, which does not open the concrete the way mechanical grinding does, so the coating often peels under hot tires within a year. We diamond-grind or shot-blast every floor and use professional-grade, high-solids products, which is why our coatings last years longer than a big-box kit.

Not when it is installed correctly. Hot-tire pickup happens when a coating was not bonded to a properly profiled surface. Because we mechanically grind the concrete and use high-build professional systems, our floors resist hot-tire pickup, oil, and chemicals.

Yes. We repair cracks, control joints, and spalled or pitted areas as part of the prep, then grind them flush before coating. The decorative flake broadcast also helps camouflage minor imperfections for a clean, uniform finish.

Yes, we serve all of Millington including the Navy Base Area, Woodstock, and Shelby Forest, along with the surrounding Memphis-area communities.